ASHISH J. MODI

PUBLICATIONS 

Intenational Journal

  1. Experimental Study on Thermal Barrier Coated (TBC) Diesel Engine Performance with blends of diesel and Palm biodiesel", Modi A.J. , Gosai D.C., SAE Int. J. Fuels Lubr., Vol.3 (2), pp. 246-259, 2010, ISSN (Print): 1946-3952, ISSN (Online): 1946-3960, doi:10.4271/2010-01-1519 
  2. "Experimental Analysis of Performance of Thermal Barrier Coated (TBC) Diesel Engine", Modi A. J., Gosai D.C., International Journal of Advances in Thermal Science and Engineering, 1(1) June 2010, pp. 17-25, Serials Publication, New Delhi. 
  3. "Experimental Study of Energy Balance in Thermal Barrier Coated Diesel Engine", Modi A. J., SAE Technical Paper, 2012-01-0389, April 2012, ISSN: 0148-7191, doi:10.4271/2012-01-0389
  4. "Effect of Different Variables on Heat Transfer Rate of Four Stroke SI Engine Fins - Review Study", Rathod Hardik, Modi A. J.,  Int. J. Mech. Engg. and Tech., Vol.4 (2), pp. 328-333, March-April, 2013, ISSN (Print): 0976-6340, ISSN (Online): 0976-6359.
  5. "Computational Analysis of Heat Transfer Through FOur Stroke SI Engine Fins" Rathos Hardik, Modi A. J., Int. J. Sci. Research and Dev., Vol 1(3), May 2013, ISSN (Online): 2321-0613.
  6. "Analysis of Engine Cooling Water Pump of Car & Significance of its Geometry", Patel Bhavik, Modi A. J.,  Int. J. Mech. Engg. and Tech., Vol.4 (2), pp. 100-107, March-April, 2013, ISSN (Print): 0976-6340, ISSN (Online): 0976-6359.
  7. "CFD Analysis of CI Engine Cooling Water Pump of Car", Rathos Hardik, Modi A. J., Int. J. Sci. Research and Dev., Vol 1(3), May 2013, ISSN (Online): 2321-0613.
  8. "Review Paper on Experimental Investigation on Combined Effect of Thermal Barrier Coating and Blending on Stationary Four Stroke CI Engine Performance and Emission Characteristics", Patel Dhiren, Modi A. J., Int. J. of Research in Engg. & Adv. Tech, Vol 2 (1), Feb-March, 2014, ISSN : 2320-8791
  9. "Experimental Study on LHR Diesel Engine Performance with Blends of Diesel and Neem Biodiesel", Modi A. J.,  Patel Dhiren, SAE Technical Paper, 2012-26-0052, 14 January 2015, ISSN: 0148-7191 doi: 10.4271/2015-26-0052.
  10. "Analysis of Microchannel Heat Sink using CFD", V.U.Patel, A. J. Modi, International JOurnal of Engineering Sciences & Research Technology, 4.(6):June,2015.
  11. "Performance Analysis of Exhaust Gas Calorimeter for Diesel Engine", Patel H. M., Gosai D.C., Modi A. J., International Journal of Engineering Development and Research, Volume 2, Issue 2, pp. 2492 - 2501, 2014, ISSN: 2321-9939


Intentional Conference

  1. "Experimental  Analysis of Performance of Thermal Barrier Coated (TBC) Diesel Engine"  Gosai D.C.,Modi A.J. * at International Conference on Advances in Mechanical Engineering (ICAME - 2009), SVNIT, Surat. (Presented by Gosai D.C)
  2. "Experimental  Analysis of Performance of Bio-fuels (Jatropha & Palm Bio-diesel) on Thermal Barrier Coated (TBC) Diesel Engine"  Modi A.J. *,Gosai D.C. at 3rd International Conference on Advances in Mechanical Engineering (ICAME - 2010), January 4-6, 2010, SVNIT, Surat. (Presented by Modi A.J.)
  3. "Biodiesel : The Alternate of Petroleum Diesel "  Modi A.J. *, Gosai D.C. at 3rd Internationa Symposium on Renewable Energy for Rural Devlopment (ISORE - 2010) February 25-27, 2010, S.N.Arts, D.J.Malpani Commerce & B.N. Sarda Science College, Sangamner, Dist. Ahmednagar, Maharastra. ( Presented by Modi A.J.)
  4. "Stress analysis of a Twin tube type of an automobile shock absorber using ANSYS®" Gajjar V.Y., Modi A.J.*  at 4th International Conference on Advances in Mechanical Engineering (ICAME - 2010), SVNIT, Surat. (Presented by Gajjar V.Y.)
  5. "Determination of Distribution of in the mass flow rate of the coolant flowing inside each tube by means of an indirect method, in a water-to-air, tube finned type, triangular pitched, cross flow heat exchanger", A.R.Patel, K.K. Araniya, Modi A.J.* at 4th International Conference on Advances in Mechanical Engineering (ICAME - 2010), SVNIT, Surat. ( Presented by Araniya K.K.)
  6. "Structural Analysis of Different Geometry Heads for Pressure Vessel using ANSYS Multiphysics", Modi A.J.*, Jadav C.S. at 5th International Conference on Advances in Mechanical Engineering (ICAME - 2011), SVNIT, Surat.( Presented by Jadav C.S.)
  7. "Fatigue Analysis of Wind Turbine Blade using FE analysis", Modi A.J.*, Gosai D.C. at 5th International Conference on Advances in Mechanical Engineering (ICAME - 2011), SVNIT, Surat.( Presented by Gosai D.C.)
  8. "Fatigue Analysis & Weight reduction of connecting rod using FEM", Soni Raj, Modi A.J.* at International Conference on Advanced Research Applications in Engineering and Technology, Shaastrarth-2015, Rungta College of Engineering and Technology, Bhilai.                    ( Presented by Raj Soni)
  9. "Fatigue Analysis & Weight reduction of connecting rod using FEM", Soni Raj, Modi A.J.* at International Conference on Advanced Research Applications in Engineering and Technology, Shaastrarth-2015, Rungta College of Engineering and Technology, Bhilai.                    ( Presented by Raj B. Soni)
  10.  "Structural Analysis of connecting rod using FEM", AAICSET-2015, 3rd International Conference on Science Engineering and Technology, Bharuch.  (Presented by Raj B. Soni)


National Conference

  1. "Experimental  studies on Thermal Performance of a Tube-FIn Type of Automobile Radiator " Modi A.J., Rathod M.K., P. Prabhakaran, National Conference on Advances in Fluid Flow and Thermal Sciences (AFFTS - 2008), SVNIT, Surat, 22-24 May, 2008 (Presented by Modi A. J. )
  2. "Experimental Study on Emission Performance of Diesel Engine Fuelled with Blends of Diesel and Jatropha Biodiesel", Kevadia Pritesh, Modi A. J., Thermal Fluid and Manufacturing Science, 2012, Narosa Publication House, New Delhi, pp. 255-261, ISBN: 978-81-8487-202-6. (Presented by Kevadia Pritesh ) 
  3. "Experimental Study of effect of EGR Rates on NOx and Smoke Emission of TBC Diesel Engine Fuelled with Blends of Diesel and Jatropha Biodiesel", Modi A. J., Kevadia Pritesh,  Thermal Fluid and Manufacturing Science, 2012, Narosa Publication House, New Delhi, pp. 262-268, ISBN: 978-81-8487-202-6. (Presented by Kevadia Pritesh ) 
  4. "Performance Analysis of Scramjet Engine - A Review", Bhoya Y.M. , Modi A.J.Thermal Fluid and Manufacturing Science, 2012, Narosa Publication House, New Delhi, pp. 99-105, ISBN: 978-81-8487-202-6. (Presented by Bhoya Y.M. ) 
  5. "Effect of Cooling on Performance of Electronic Heat Sinks - A Review" , Patel V.U.,Modi A.J., Thermal Fluid and Manufacturing Science, 2012, Narosa Publication House, New Delhi, pp. 148-153, ISBN: 978-81-8487-202-6. (Presented by Patel V.U.  ) 
  6. "Optimization of Heat Sink Analysis for Electronics Cooling", Patel V.U., Modi A.J., National Conference on Advances in Mechanical Engineering (NCAME'12) MED, R.C. Patel Institute of Technology, Shirpur (MS). (Presented by Patel V. U. ) 
  7. "Effect of Fuel Air Ratio on Performnace of Four Stroke Compression Engine by Phenomenological Modelling", Makwana V.M., Modi A.J., Patel D. J., National Conference on Advance and Challanges in Engineering and Science (NCACES), National Journal of Engineering and Technology, Volume 1, 2012, LCIT, Bhandu, Mehsana (Presented by Makwana Vinod M. ) 
  8. "Analysis of Connecting Rod for Weight Optimization - A Review", Soni R. B., Patel N. J., Modi A. J., NCIME-2015, 3rd National Conference, Sinhgad Institute of Technology, Lonawala. (Presented by Raj B. Soni )